EPS cement composite board steel structure building

EPS Cement composite panels steel structure building steel structure workshop Introduction: The load bearing parts for steel structure workshop are mainly steel structures, including steel columns, steel beams, steel structural basements, bracing systems for wall and roof. Steel workshops a

Featured Products

EPS Cement composite panels steel structure building 

steel structure workshop Introduction:
 
The load bearing parts for steel structure workshop are mainly steel structures, including steel columns, steel beams, steel structural basements, bracing systems for wall and roof. Steel workshops are divided into Light Steel Workshops and Heavy Steel Workshops. The Main Structure are usually made of Q345 Steel while the Purlins and Bracing System are made of Q235 Steel. They are the most common steel materials used for steel structure in China.
Advantages of Steel Structural Workshop:
1).Large span for great strength with light deadweight; 
2).Short finishing time and low cost;
3).Fire proof and rust proof;
4).Convenient to assemble or disassemble.

 
 
steel structure workshop Technical Parameters:
 
1.Main Structure: Steel Welded H Section
2.Purlin: C Section Channel or Z Section Channel
3.Roof Cladding: Sandwich Panel or Corrugated Steel Sheet with Fiber Glass Wool Coil
4.Wall Cladding: Sandwich Panel or Corrugated Steel Sheet
5.Tie Rod: Circular Steel Tube
6.Brace: Round Bar
7.Column & Transverse Brace: Angle Steel or H Section Steel or Steel Pipe
8.Knee Brace: Angle Steel
9.Wrapping Cover:Color Steel Sheet
10.Roof Gutter: Color Steel Sheet
11.Rainspout: PVC Pipe
12.Sliding Sandwich Panel Door or Metal Door
13.Windows: PVC/Plastic Steel/Aluminum Alloy Window
14.Connecting: High Strength Bolts
 
Main parts and materails of steel structure workshop  :
 

No.
LtemSpec.GradeUnit.
1Main Steel System

Main Steel Frame
Q345BT

Manufacture charge

T
2Secondary part Steel system

Roof purlinC180*70*20*2.5Q235BT

Wall purlinC180*70*20*2.5Q235BT

Brace between column, Horizontal supportAngle steel Φ20Q235BT

Knee bracingSteel Angle L50*4Q235BT

Tie barSquare tubeΦ114*2.5Q235BT

Support bar round tubeΦ32*2.5Q235BT

Brace between purlin round barΦ12Q235BT
3roof System 

Roof panel0.5mmthickness corrugated steel sheet V820
m

Skylight panel1.2mm thick
m

Standard Parts Self-tapping screw,sealing 
tape,sealant

m

Non-standard PartsColored profile parts 
for ridge,roof

m

Gutter

m

Downpipes

m
4Wall System 

wall panel0.45mm thick corrugated steel sheet V820
m

Standard Parts Self-tapping screw,sealing 
tape,sealant

m

Non-standard PartsColored profile parts for 
edge cover,flashing

m

Door Colored steel panel door
m2

WindowPlstic Steel Window
m2

Awning

m2
5Fastners

Foundation bolts M24x70
SET

High strength boltsM20
SET

Common  boltsM12
SET

steel structure workshop   Products Display :

FIRST PART, OUR COMMENTS AND IDEAS:
 
1)We can supply all kinds of steel structures, steel bulding, metal building, modular house,
Steel frame for warehouse, workshop, garage etc, steel beams, other riveting and welding parts.
2)We can also make and develop new parts according to customers' drawings and detailed dimensions.
3)Specifications
a)Size: MOQ is 10m2, width X length X eave height, roof slope,you should inform us the above requests.
b)Type: Single slope, double slope, muti slope; Single span, double-span, Multi-span, single floor, double floors!
c) Base: Cement and steel foundation bolts
d) Column and beam: Material Q345(S355JR)or Q235(S235JR) steel, all bolts connection! Straight cross-section or Variable Cross-section!
e) Bracing: X or V or other type bracing made from angle, round pipe, etc
f) C or z purlin: Size from C120~C320, Z100~Z200
g) Roof and wall panel: Single colorfull corrugated steel sheet0.326~0.8mm thick, YX28-205-820(820mm wide),
Sandwich panel with EPS, ROCK WOOL, PU etc insulation thickness around 50mm~150mm, width 950mm or 960mm!
h)Accessories: Semi-transparent skylight belts, Ventilators, down pipe, outer gutter, etc
i)Surfrace: Paint or hot dip galvanize!
j) Packing: Main steel frame without packing load in 40'OT, roof and wall panel load in 40'HQ!
k)Design ParametersIf you need we design for you, pls supply us the following parameter together with detail size:
1)Live load on roof(KN/M2)
2)Wind speed(KM/H)
3)Snow load (KG/M2) if have
4)Earthquake load if have
5)Crane (if have), Crane span, crane lift height, max lift capacity, max wheel pressure
SECOND PART,OUR ADVANTAGES:
1st point,Our company could design,fabricate,suppl,install steel structure with 70meters-90meters clear span,so that the owner could use space of 70meters-90meters clear span,which meet the needs of owner's introducing crane,heavy industry equipments and other technique procedure,as a result we provide youi multiple choices for your future extentions.
2nd point,We are also professional at fabricating,supplying steel structure tourism Parkview complex buildings,Which includes tourism,recreation,food,shopping,leisure,holiday activities.
3rd point, we could fabricate,supply,export and install the following China Standard section structural steel:
W18X35 H450X160X8X12
W21X55 H530X210X10X14
W24X68 H600X230X12X16
W16X26 H400X140X8X10
W14X132 H380X380X18X26
W14X22 H350X140X6X10
W10X20 H260X150X6X10
4th point, We manufacture and supply many standards of structural steel components,such as ASTM A36 following structural section steel and other not mentioned structural section steel: W18X76,W16X77,W16X57,W14X48,W12X35,W12X26,W10X22,W10X19,W4X13,S4X9.5,MC10X22,MC2X18.7,L5X5X5/16,L4X4X3/8,L3 1/2X3 1/2X 1/4,L3X3X1/4,L2 1/2X2 1/2X1/4,L2X2X5/16,25 THK.PLATE,20 THK.PLATE,16 THK.PLATE,10 THK.PLATE.
5th point,we often make following type of steel structure of shipyard building,the following details are for our steel structure shipyard in Britain:
Delivery date: 6/10/2009.
Steel grade: Q345B.
Thickness of plates: δ6~δ40
Welding: Complete penetration of most welds.
Member description: This project includes welded H section columns, big section height welded H section crane girder. Complicated frame demand processing in whole member, with difficulties of turning and transporting of 40MT one unit. And crane girder has big section height, thick plates, high demanding in welding, and full completely penetration between flange and webs.
6th point,Because of our sincerely service attitude,truely solve the owner's difficulties,think the owner's thought as our own thought,the owner have continuously orderedsecond phase steel structure project,third phase steel structure project.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours