840# Prepainted Steel Sheet
Product Features
840 prepainted steel sheet is a 840mm net coverage structural roofing deck and walling cladding. It is roll-formed from Prepainted Hot Dip 55%AL-ZN Coated Steel coil. It is our premium and most cost effective roofing and walling profile. It is available in both convex and concave pre-curved sheets, to meet architectural features. It is an economical and attractive wall cladding widely used for exterior and interior walls of residential, commercial and industrial applications. It also can be used for ornamental surfaces in more contemporary colors.
Product Features
840 prepainted steel sheet is a 840mm net coverage structural roofing deck and walling cladding. It is roll-formed from Prepainted Hot Dip 55%AL-ZN Coated Steel coil. It is our premium and most cost effective roofing and walling profile. It is available in both convex and concave pre-curved sheets, to meet architectural features. It is an economical and attractive wall cladding widely used for exterior and interior walls of residential, commercial and industrial applications. It also can be used for ornamental surfaces in more contemporary colors.
- Excellent loading capacity meets the larger span design requirement.
- Standard distance between ribs to save fasteners;
- The appealing architectural appearance and multiple color choices accommodate different design features;
- High tensile strength steel base enhances the profiles wind pressure capability;
- Self-drilling installation. Fasteners at the crest of the ribs for roofing, and at the valley of the ribs for walling;
- Overlapping side ribs are designed to prevent the capillary entry of water;
- Flexible and simple design. The flutes can be used horizontally or vertically which gives a more architectural appearance.
- An attractive, multi-ribbed profile makes it suitable for a wide range of residential, commercial and industrial applications.
- Ornamental appearance can be used for ceilings, partition facings, screens, garage doors, fascia and barge boards.
- The use self-drilling fasteners during the installation process make the product quick and easy to install.
- Cost effective wall cladding.
(%) | ||||||||||||||||||||||||||||
Material | Description | Chemical Composition | Tensile Test | Coating Mass | Coatthickness | Coat Property | ||||||||||||||||||||||
60° | ||||||||||||||||||||||||||||
COIL No: | C | Si | Mn | P | S | |||||||||||||||||||||||
NO. | Thick | Width | Length | Mass | E.L. | Both | Top | Bot | finish | Bot | (T) | (J) | ||||||||||||||||
Y.S. | T.S. | Grade | ||||||||||||||||||||||||||
(mm) | (mm) | (m) | (t) | ×102 | ×102 | ×102 | ×103 | ×103 | MPa | % | (g/m2) | (μm) | *01 | *02 | *03 | *04 | ||||||||||||
1 | 160903523B | 0.600 | 1200 | 837 | 4.670 | 4.6 | 1.7 | 11 | 9.0 | 2.5 | 278 | 358 | 33.0 | 125/74/52 | 20 | 5 | OK | 31 | OK | OK | ||||||||
2 | 160903533B | 0.600 | 1200 | 861 | 4.850 | 4.3 | 1.3 | 10 | 18.0 | 3.9 | 224 | 352 | 37.5 | 121/56/65 | 20 | 5 | OK | 31 | OK | OK | ||||||||
/ | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | |||||||
/ | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | |||||||
/ | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | |||||||
/ | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | |||||||
Total: | 2 | 9.520 | ||||||||||||||||||||||||||
Notes: | Y.S.=Yield strength T.S.=Tensile strength EL=Elongation G.L=Gauge length L1=5.65SQRT(FO) L2=50mm L3=80mm | |||||||||||||||||||||||||||
*01:Pencil hardness*02:Specular gloss*03:Coat bending *04:Reverse impact(J) | ||||||||||||||||||||||||||||
: | (Remarks): | |||||||||||||||||||||||||||
1.; | 1,; | : | ||||||||||||||||||||||||||
2.. | 2,. | Surveyor | ||||||||||||||||||||||||||
Explains: | ||||||||||||||||||||||||||||
() | ||||||||||||||||||||||||||||
1.The duplicate should not be equally authentic as the original | ||||||||||||||||||||||||||||
Quality Stamp | ||||||||||||||||||||||||||||
inspection certificate . | : | |||||||||||||||||||||||||||
2.The steel grade is subject to the inspection certificate's. | ||||||||||||||||||||||||||||
Stationmaster | ||||||||||||||||||||||||||||